1-7. Which   of   the   following   types of   storage   is   normally outside  the  main  body  of  the computer  and  is  used  to store   programs   and   data   for future   use? 1. Map    storage 2. Hyper    storage 3. Secondary    storage 4. Peripheral    storage 1-8. Anytime   an   input   or   output device   is   under   the   direct control  of  the  CPU,  we  say the  device  is  in  what  mode? 1. Online 2. Offline 3. Stand-by 4. Parallel 1-9. Which   of   the   following components   is   NOT   considered an   input/output   (I/O) device? 1. Computer    terminal 2. Scanners 3. Floppy   disks 4. Magnetic   tape   unit 1-10. Whether  an  I/O  channel  is input  only, output   only,   or both  input  and  output  is determined   by   what   person   or primary    factor? 1. 2. 3. 4. The   systems   analyst The     maintenance programmer The  design  of  the  CPU itself The   specific   type   of peripheral    device 1-11. An  I/O  channel  that  is capable   of   communicating   in both   directions   but   in   only one  direction  at  a  time  is what   type   of   channel? 1. Half-duplex 2. Full-duplex 3. Half-simplex 4. Simplex 1-12. Under    full-duplex    I/O channel    operations, communications    are    possible in   which   of   the   following directions? 1. From  the  computer  to  the terminal    only 2. From  the  terminal  to  the computer    only 3. In   both   directions simultaneously 4. In   both   directions,   one direction   at   a   time 1-13. When   data   is   transmitted over   a   communications channel  in  a  serial  fashion, the  data  is  sent  or  received in   which   of   the   following forms? 1. Bits 2. Words 3. Records 4. Characters 1-14. Which   of   the   following devices  is  used  to  convert  a digital   signal   produced   by your   terminal   to   an   audio signal   suitable   for transmission   over   a communication    line? 1. A   line   conditioner 2. A   signal   generator 3. A modulator-demodulator 4. An     analog-to-digital simulator 2